Tripp Lite 2-Port Dual Display DVI over Cat5 / Cat6 Extender Video Splitter TAA

? Transmits a DVI-D Single-Link signal from a set of Dual DVI inputs to two sets of Dual Displays

? A B140-Series remote receiver is needed at each monitor

? For longer distances: Use a B140-1A0 active receiver to extend a 1920 x 1200 at 60 Hz signal up to 150-ft. (45.7 m) from the transmitter (or a 1024 x 768 at 60 Hz signal up to 200-ft. (61 m) from the transmitter)

? For shorter distances: Use a B140-1P0 passive receiver to extend a 1920 x 1200 at 60 Hz signal up to 50-ft. (15.2 m) from the transmitter (or a 1024 x 768 at 60 Hz signal up to 100-ft. (30.5 m) from the transmitter)

? Use 24 AWG Solid Wire Cat5e/6 cable, such as N202-Series to achieve maximum distance and resolution

? Further expand the range and number of monitors by adding B140-110 remote repeater units

? Add up to three repeaters on each of the B140-002-DD channels, for a total of 4 displays per channel (An active receiver should be the last unit in a channel)

? A 1920 x 1200 at 60 Hz signal can be extended up to 125-ft. (38.1 m) for each repeater added into a channel (or up to 175-ft. (53.3 m) for a 1024 x 768 at 60 Hz signal)

? DVI 1.0 compliant

? HDCP compatible

? Mounting hardware included that allows the unit to be wall-mounted, rack-mounted, or pole mounted

? Plug and play; no software or drivers required

? Compatible with all operating systems

? Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.

Key Points

Product Features